Aluminium, glass and ACP — supplied, fabricated and installed
Based in Dubai, we supply aluminium systems, architectural glass and composite panel — installed by our own teams in the UAE, and quoted for export across the GCC, North Africa and Europe.
Supply & exportAluminium, glass, ACP, sheet and plate — quoted for local delivery or export.
FabricationCut, edged, drilled and made up to surveyed dimensions.
Installation in the UAECurtain walling, partitions, balustrades, doors and windows.
Who we are
One reliable partner across the full project lifecycle
A L U Trading LLC is a UAE-based company specialising in the supply, fabrication, installation and project execution of architectural aluminium, glass, façade and Aluminium Composite Panel (ACP) systems.
Our integrated approach means clients draw on a single source for both material procurement and project execution — supporting tighter quality control, clearer cost accountability and more dependable delivery programmes.
We work with contractors, subcontractors, fit-out companies, consultants, architects and developers — from a single sheet of aluminium through to a full façade package.
Both divisions operate under one company, so you can take material supply on its own, a fully installed package, or any combination of the two.
01
Trading & Supply Division
Material supply, priced against your schedule
We stock and source aluminium profiles and systems, architectural glass, ACP and aluminium sheet and plate for construction and fit-out work. Send a BOQ, a cutting schedule or a set of drawings and we come back with pricing, availability and a realistic lead time — not a generic rate card. Enquiries from outside the UAE are quoted on the same basis, with despatch terms confirmed per order.
Where a package needs installing rather than just delivering, our own teams take it on: site survey, shop drawings, fabrication, installation and handover. Curtain walling, glazed partitions, balustrades, doors and windows — measured on site, made to those dimensions, and fitted by the people who made them.
Not slogans — the specific things we do on every job, and what each one prevents.
Supply and installation on one contract
No split responsibility between a trader and an installer. If the glass is wrong or the fit is wrong, it is the same company answering for it.
Site dimensions, not drawing dimensions
We survey the opening before anything is cut. Fabricating to nominal drawings is how packages arrive on site 15 mm out and sit in a container for three weeks.
Specification advice before you order
Which build-ups hold up in a Gulf summer, which details leak, and what a consultant will reject at submittal — we will tell you before it is fabricated, not after.
Drawings and coordination handled here
Shop and production drawings are prepared in-house and submitted for approval, so the interface with the main contractor stays with one party.
Lead times quoted per package
Stock sheet moves faster than a fabricated façade. We give you the actual lead time for what you are ordering rather than a headline figure.
One contact from enquiry to handover
The person who prices the job stays on it. You are not re-explaining the scope to a different department at every stage.
The same sequence applies whether the job is one
elevation or a whole building envelope. Skipping the survey to save a week is what causes
the four-week delay later.
Aluminium — sliding doors, curtain wall profiles, thermal and non-thermal window and door systems, kitchen and handrail profiles, and powder coated sections. Glass — clear float, ultra clear, laminated, tinted, fire rated, Low-E, wired, reflective and mirror. ACP for exterior cladding, interior walls, signage and ceilings. Aluminium sheet and plate in mill, polished, brushed, embossed and pre-coated finishes. The full range is listed on this website, and we can source items outside it on request.
Both, and you can take either on its own. The Trading & Supply Division quotes and delivers material. The Fabrication & Installation Division carries out curtain walling, glazed partitions, balustrades, glass processing, and door and window installation. You can use us for material supply on one project and installed works on the next.
Because the gap between a material supplier and a separate installer is where programme and responsibility tend to get lost. If a unit arrives at the wrong size, a split arrangement produces an argument; here it is one company's problem to fix. It also means the specification agreed when you place the order is the one our own installers work to.
Installation works are carried out across the United Arab Emirates from our Dubai base. For material supply we also quote export enquiries — the wider GCC (Saudi Arabia, Qatar, Kuwait, Oman, Bahrain), North Africa (Egypt, Libya, Tunisia, Algeria, Morocco) and selected European markets. Tell us the destination with your enquiry and we will confirm what we can despatch, on what terms and in what timeframe.
Use the Request a Quote form on this website and attach drawings, a BOQ extract or a specification. You can also email info@alutrading.ae, call +971 54 566 8484, or send the details on WhatsApp.
The more specific the enquiry, the more useful the quotation. Most helpful are: the product or system, quantities and units, the project type and location, the date you need it, and any drawings, schedules or specification extracts. If a consultant has issued a performance specification, send that too.
